News


NEWS :

April 2017: New Products for Thermal interfaces by Indium Corp.

Indium Corporation announces the phase in of two important materials for high power Applications.
1. HSMF THERMAL INTERFACE MATERIAL
 
It is a thermal interface material specially designed to solve problems related to the use of thermal grease in applications where the powers and the temperatures do not require metal-type interfaces such as HeatSpring. It is presented in the form of strips or preformed easily be cut by the customer. The main advantages over the thermal grease include:
- solid, easy to handle, non-greasy and non-staining;
- better thermal resistance of the best thermal grease on the market;
- not subject to the pumping phenomenon (leakage of fat) or bake-out (baking and drying);
- vastly superior to the fat in the resistance to thermal cycling
- in essence, much cheaper and reliable than thermal grease.
 
2. InFORMS
 
It is a composite material made by incorporating a copper mesh between two layers of solder. The sheet so obtained may subsequently be cut into any shape (preform) and can be used to weld power components on any metallic substrate. The particular nature of this product allows to obtain extremely robust and reliable welds for the poor consistency of voids (maximum efficiency in heat transfer) and resistant to particularly severe thermal cycles such as those required in the automotive field (complete absence of delamination).
        The thickness may be decided by the customer, but typically the copper mesh is 200 microns thick while the two alloy layers are 25 microns each. The most popular alloy for this product is the alloy # 133 (95Sn5Sb) which has a melting temperature of 237 ° -240 ° C.
 
Technical details of these materials are available in the following documents:
 
 

March 2017 : Paris Space Week 2017, on March 8th and 9th

Dimac e Partners personnel will be present at the Paris Space Week 2017, on March 8th and 9th . This Space Exhibition is one of the most relevant for this kind of Applications: see http://www.paris-space-week.com/ for more details. Our Booth will be F06 & F08.

Please contact us at dimacred@dimacred.com or call us at +39 039 2494856 to schedule a meeting with our Specialists.

 

February 2017: Input transient protections simplifications with new DC-DC converter by Gaia

Gaia Converter extends its ultra wide input voltage range DC/DC Converters platform to the new High Rel MGDD-40 series,  targeting Military and Airborne applications.

New 40W, Ultra Wide input voltage range DC-DC converter from Gaia-Converter simplifies input transient protections

Uniquely wide, the MGDD-40 Series 9-60V & 80V transient input voltage range is ideal to comply with Mil-Std-1275, 704 or DO-160 standards without additional front end protection device. This unique performance is achieved thanks to Gaia's proprietary switching techniques while also keeping efficiency over 90%.

With 2 outputs (for parallel, serial or symmetrical operation) of 5V, 12V, 15V and 24V, they can cover a wide variety of needs such as single 5V to 48V output, or two 24 V for example.

Packaged in a very low profile 0.33'' and 1.5”x1.75” housing, the MGDD-40 Series have a wide temperature range of -55°C to +105°C and are potted to fit rugged Military and Airborne environmental conditions.

The units are full featured and protected with zero to full load regulation, Trim & On/Off capability, adjustable UVLO,  soft start, embedded EMI filter as well as over-current and over-temperature protection. They can also be synchronized and/or paralleled for added power or N+1 redundancy.

Designed for rugged applications, the MGDDI-40 series do not use any optocoupler.

 

About GAIA Converter

Gaia Converter was created in the early 1990’s. Since that time the company has developed one of the most comprehensive ranges of modular power components in the electronics market place. Gaia Converter also brought to the market its now well established concept of Modular Power Architecture simplifying the design of complex power supplies. With more than 5 000 standard power component references serving the industrial, transportation, aerospace and military markets, Gaia Converter is recognised as one of the world leaders of “power module” solutions.

 

For more information: contact: www.gaia-converter.com

PR/026

 

January 2017: New! High-Q Series Now AEC-Q200 Qualified

 

Johanson has now completed the qualification of the R05L, R07S, R14S, R15S, S42E series per the latest revision (rev D) of the AEC-Q200 automotive standard. This opens opportunities in the automotive market such as:

- In-car wireless communication ➡ R05L series
- Keyless entry for car ➡ R07S series
- Wireless charging of smart phones ➡ R14S/R15S series
- Wireless charging of laptops ➡ S42E series


With this qualification, Johanson is now one of the few high-Q capacitor manufacturers that are AEC-Q200 qualified. A big plus in promoting high-Q to new customers!

 

December 2016: New Release! Low Cost, Ultra-Low Loss 2.4 & 5 GHz Diplexer

Johanson Technology releases its newest low cost and ultra-low loss WiFi ceramic diplexing technology for 2.45 and 5.5GHz. This component was designed with the lowest insertion loss possible, highest attenuation, and isolation for excellent performance. It exhibits Low Pass Filtering for the 2G band and Band Pass Filtering for the 5G Band. No MOQ required.

P/N: 2450DP15L5400. Samples available immediately.

 

 

Click here for datasheet:  

http://www.johansontechnology.com/datasheets/diplexer/2450DP15L5400.pdf

 

December 2016: VPG - CSM3637F, four term. Bulk Metal Z-Foil High Precision Current Sense Resistors.

Vishay Precision Group, Inc. product group, announced that its Vishay Foil Resistors brand has introduced a new current sense resistor for the medical, energy, military and aerospace markets. The high-precision, surface-mount, four-terminal CSM3637F current sense resistor is an industry first due to its size in combination with an improved load-life stability of ±0.02% at +70°C for 2,000 hours with a low TCR of ±5 ppm/°C max from -55°C to +125°C and a high power rating up to 3 W.
 
 
The CSM3637F resistor is optimized for high-precision current sensing applications in switching linear power supplies, power amplifiers, power management systems, feedback circuits, measurement instrumentation and automatic test equipment. The device features a resistance range from 50 mΩ to 200 mΩ with any conceivable ohmic value within this range — out to six digits — available with no additional cost or lead time effect. The resistor provides ESD immunity to 25 kV or more, power coefficient of resistance (ΔR due to self-heating) of 5 ppm/W at rated power, and tight tolerance of ±0.1%.
The CSM3637F resistor’s unique combination of Bulk Metal® Z Foil Technology and a four-terminal Kelvin connection results in a significant reduction of the device’s sensitivity to applied power changes such as power coefficient of resistance (PCR) and thermal resistance, while its low TCR reduces errors due to temperature changes. Short-time overload tests applying 10 W power for 5 seconds on the device were passed with a maximum ∆R of 0.01%.
 

November 2016: Dimac Red will be present at booth A6 165 at Electronica 2016

Dimac Red will be present at booth A6 165 at Electronica 2016 in Munich.

 

October 2016 :Johanson Technology releases new 900MHz/2.4GHz IoT Diplexer

In the world of connected devices that use multi-protocol gateways, many IoT, M2M sensors, wearables, AMRs, etc., use multiple RF transceivers or radios that have both Sub-GHz and 2.4G ISM bands in one for versatility. For this purpose, we've developed a simple, low cost diplexer that allows the designer to use one single antenna system and a simplified front-end. This enables one to be FCC & ETSI compliant due to the Low Pass Filter and Band Pass Filter embedded in the component. P/N is: 0900DP15A2450 (click for datasheet).
 
 
For samples, request them writing to dimacred@dimacred.com  or here  http://www.johansontechnology.com/request-a-sample
 
 
 
For more information and technical documents:
 
 
 
 
 
 
 
 

October 2016: ANAREN and DIMAC RED sign distribution agreement

ANAREN AND DIMAC RED, S.p.A. SIGN DISTRIBUTION AGREEMENT

The Syracuse-based Company Solidifies European Component Distribution Footprint

 

Syracuse, NY | September 16, 2016 – Anaren, Inc.’s Space and Defense Group announced today that it has signed an exclusive distribution agreement with the pan European distributor Dimac Red of Biassono, Italy. The agreement gives Dimac Red the ability to promote, distribute, and market Anaren components throughout Europe. Dimac Red’s reach includes France, Germany, United Kingdom, Spain, Italy, Belgium, Switzerland, Norway, Sweden, Finland, Portugal, Netherlands, Luxembourg, Greece, Denmark, Ireland, Austria, Poland, and the Czech Republic. Under this agreement DIMAC Red will have access to a component portfolio that includes Anaren’s entire series of high performance analog microelectronics produced for the military and space markets and sold under the MS Kennedy (MSK) brand, with standard products including operational amplifiers, video amplifiers, motor drives and linear regulators, as well as switching voltage regulators. MSK is also a leading producer of custom hybrids, power hybrids and multichip modules. Additionally, Anaren’s line of passive, active, low and high-power RF and microwave components will be available for sale into military, space, and commercial applications.

 

“The European market represents an enormous opportunity for Dimac Red and Anaren, and we are excited to be able serve our pan-European customer-base with Anaren’s broad portfolio of components for critical space-grade missions as well as for the demanding European commercial applications market,” said Valter Arosio, CEO of DIMAC Red. “This agreement will make it significantly easier for European customers to have access to Anaren’s expertise through DIMAC Red’s high-level of customer service and focus on quality,” added Arosio.

 

 

“It’s a tremendous challenge to bring a diverse product portfolio to a market that is itself geographically diverse. DIMAC Red is the perfect partner for us in meeting that challenge. DIMAC Red is a professional sales organization, with 30-years of experience and dedication serving the European market with high reliability electronic products, “ said Mark Kosalek, Vice President of Business Development for Anaren’s

Space & Defense Group. “We’re pleased to enter into this relationship knowing how well DIMAC Red will provide customers with products and services that require a unique level of technical support,” Kosalek added.

 

                                                

ABOUT ANAREN

About to enter its 50th year in business, Anaren, Inc. designs, manufactures and sells custom high-frequency solutions and standard components for the wireless communications, space and defense electronics, wireless consumer electronics, and IoT markets. Additional information can be found on the company’s website: www.anaren.com

 

ABOUT DIMAC

DIMAC is a professional sales organization, established in 1979, dedicated to serving the European market with High Reliability electronic products. Our services include design, prototypes and subsystems production, hired procurement activities, design analyses (WCA, FMECA, radiation) and additional screening/testing. Focused mainly on the aerospace, military, railway markets ( but also on automotive, telecom and medical markets), our experienced technical engineers provide Design-In and Added Value in order to help professionals and designers use High Reliability electronic components and sub-systems. Using this resource, our customers have an easy access to a wide knowledge of the latest advanced technologies suitable for their needs. DIMAC is ISO9001:2008 and Trace anti-bribery compliant. For more information, please visit: www.dimacred.com

 

September 2016: Dimac red attending European Microwave Week 2016

Dimac Personnel will be attending European Microwave EUMW 2016 at ExCel London, UK. They are available to meet Customers at ExCel on October 5th. Please contact us  by email dimacred@dimacred.com or by phone +39 039 2494656 to schedule a meeting.

Dimac is representative and/or Distributor of the most important Companies which will be present at EUMW in London, UK.

 

 

For more details on the event please see:  http://www.eumweek.com/

 

 

 

 

September 2016: Dimac red attending InnoTrans 2016

Dimac Personnel will be attending InnoTrans 2016. They are available to meet Customers during this Event. Please contact us  by email dimacred@dimacred.com or by phone +39 039 2494656 to get an appointment.

Dimac is representative and/or Distributor of the most important Companies which will be present at InnoTrans with their own Booth.

 

http://www.innotrans.de/

September 2016: Dimac red attending POWER FORTRONIC

Dimac is presenting the state of the art product by Indium at POWER FORTRONIC in Bologna on September 22nd.

The latest solutions for thermal interfaces in power electronics (HeatSpring) and for nano-technologies in sodering process (NANOFOIL) will be presented. Live demos will allow Visitors to get a real feeling of the capabilities of the technologies.

There will be also two Experts to show the capabilities of ultra-capacitors technology in Systems for energy saving. 

Dimac Engineers / Managers will be available for details.  

Dimac Red s.p.a.     Engineering and sales: Via Giovanni XXIII, 25 - 20853 Biassono (MB) Tel: +39 039 2494856 - Fax: +39 039 491773 ; Legal and Social seat: Via F. Jarach, 6 - 20128 Milano
VAT Number (P.I.) 13137960152, n. iscriz. registro imprese di Milano e C.F. 08891370150, Share Capital (C.S.) € 50.000 i.v.
made by retesi
loading
.. caricamento